CHANGES IN THE QUALITY INDICATORS OF YARNS OBTAINED FROM A MIXTURE OF COTTON AND SECONDARY FIBERS WITH DIFFERENT COMPOSITION
Article Sidebar
Main Article Content
Аннотация:
Article physico-mechanical properties of yarns obtained by a pneumomechanical spinning machine from fibers of different composition were studied, in which the fiber content of the yarn: 25% secondary fiber from the yarn + 75% cotton fiber, 20% secondary fiber + 80% cotton fiber, 30% secondary fiber + 70% cotton fiber, The effect of twists of 400 br/m, 500 br/m, 600 br/m on the properties of yarns made of 15% secondary fiber + 85% cotton fiber was determined.
Article Details
Как цитировать:
Библиографические ссылки:
.Ochilov Tulkin Ashurovich, Atanafasov Mukhiddin Rakhmonovich, Toyirova Tursunoy Abdugapirovna, Patkhullaev Sarvarjon, Savkatov Aziz Omono'gli, Software for Determining the Single-Cycle Elongation Deformation of Yarns Obtained From a Mixture of Cotton Fiber and Secondary Material Resources, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET) p-ISSN: 2347-6710 Volume 11, Issue 2, February 2022.
M.R. Atanafasov, S.U. Patkhullaev, A.O. Shavkatov "Changes in one-cycle tensile deformation of yarns obtained from a mixture of cotton and secondary fibers" / Cotton ginning, textile, light industry, printing production in the conditions of integration of science, education, production Current problems of innovative technologies and their solutions, a collection of materials of the Republican scientific-practical conference. TTesI, Part I pp. 293-296.
Patkhullayev.S., Islambekova.N., Shavkatov. A Experimental studies of deformability of non-woven materials under axial tension// Institute for Science, Engineering and Technology Research Tamil Nadu, 23-24 December 202 1- India, 55-59 n.
Ochilov.T., Atanafasov.M., Patkhullayev.S., Shavkatov.A So ftware for Determining the Single- Cecle Elongation Deformation of Yarns Obtained From a Mixture of Cotton Fiber and Secondary Material Resources//International Journal of Research in Science, Engineering and Technology. Volume 11, Issue 2, February 2022, 1138-1141 n.